Includes:

• Full safety check

• Bike clean*

• Drive chain clean - includes cassette or freewheel removal and sprockets cleaned

• Chain check / degrease / lubrication

• Caliper and V-brake Brake and disc brake adjustments**

• For Hydraulic bleeds see below***

• Gear indexing front and back derailleurs

• Wheel hubs serviced 

• Headset checked (see below)

• Bottom bracket checked (see below)

• Cabling and internal routing (see below)

• Wheel check - truing (see below)

• Tyre pressure check

• Bolt tightening / Torque settings checked

• Additional work quoted before undertaken

• Local collection or pre-arranged drop-off available.

*Bike is cleaned with a correct cleaning solution, rinsed and dried. Extremely dirty bikes that require extra time may be charged £20.00

**If disc brakes and pads require decontamination and additional cleaning then this may be charged at £10 per brake.

***Hydraulic brake bleeds are £20 +£5 for chemical per caliper. Note that if required new cables will be an additional charge.

Headsets / bottom brackets - the service includes tightening and setting up correctly. Additional charges for disassembly and replacing bearings cartridge, cup and cone bearings will be quoted if needed.

Cabling for gears and brakes is included in the service but not the cost of the cables inner and outers. This is normally £4 inner and £4 outer. 

Internal routing - this will be an additional charge depending on time and complexity.

Wheel truing - Minor adjustments needed are included in the service but major truing required will be charged £20 per wheel. If the wheel is bent, warped or cracked out of shape then a new rim may be required fitting is included of a new rim.